HS 航隼帮-HS 编码查询中国税则 · 国际 HS
7219 品目 看同品目

不锈钢平板轧材,宽度在600毫米及以上

Stainless steel; flat-rolled products of width of 600mm or more

章 / 品目 / 子目本身不设税率,税率在具体 8 位税目上; 下面是本品目下的本品目下的子目,点进去看税率。

本品目下的子目 · 14 条 下一层级
编码层级中文品名英文品名 / 描述
7219.11 子目 — Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness exceeding 10mm
7219.12 子目 — Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 4.75mm or more but not exceeding 10mm
7219.13 子目 — Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of 3mm or more but less than 4.75mm
7219.14 子目 — Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, in coils, of a thickness of less than 3mm
7219.21 子目 — Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness exceeding 10mm
7219.22 子目 — Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 4.75mm or more but not exceeding 10mm
7219.23 子目 — Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of 3mm or more but less than 4.75mm
7219.24 子目 — Steel, stainless; flat-rolled, width 600mm or more, hot-rolled, (not in coils), of a thickness of less than 3mm
7219.31 子目 — Steel, stainless; flat-rolled, width 600mm or more, cold-rolled or cold-reduced, of a thickness of 4.75mm or more
7219.32 子目 — Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more but less than 4.75mm
7219.33 子目 — Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm
7219.34 子目 — Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm
7219.35 子目 — Steel, stainless; flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm
7219.90 子目 — Steel, stainless; flat-rolled, width 600mm or more, n.e.c. in heading no. 7219