HS 航隼帮-HS 编码查询中国税则 · 国际 HS

商品编码速查:按编码前缀,或按品名找

数据来自《中华人民共和国进出口税则(2026)》与 WCO 国际 HS, 支持编码前缀匹配(84 定位第 84 章、8471 定位品目、84713010 精确命中 8 位)与多关键词品名检索。

97 章 1229 品目 5613 子目 8972 个 8 位税目 11400 个海关 10 位编号

编码前缀即可:84 定位第 84 章,8471 定位品目,84713010 命中中国 8 位。全角数字自动转半角。

找到 98 条 · 第 1 / 2 页 · 耗时 0.9 ms 点编码看完整税率
编码层级中文品名英文品名 / 描述
74 章 铜及其制品 Copper and articles thereof
7401 品目 铜锍;沉积铜(泥铜) Copper mattes; cement copper (precipitated copper)
7402 品目 未精炼铜;电解精炼用的铜阳极 Copper; unrefined, copper anodes for electrolytic refining
7403 品目 未锻轧的精炼铜及铜合金 Copper; refined and copper alloys, unwrought
7404 品目 铜废碎料 Copper; waste and scrap
7405 品目 铜母合金 Copper; master alloys
7406 品目 铜粉及片状粉末 Copper; powders and flakes
7407 品目 铜条、杆、型材及异型材 Copper; bars, rods and profiles
7408 品目 铜丝 Copper wire
7409 品目 铜板、片及带,厚度超过0.15毫米 Copper plates, sheets and strip; of a thickness exceeding 0.15mm
7410 品目 铜箔(不论是否印花或用纸、纸板、塑料或类似材料衬背),厚度(衬背除外)不超过0.15毫米 Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15mm
7411 品目 铜管 Copper tubes and pipes
7412 品目 铜制管子附件(例如,接头、肘管、管套) Copper; tube or pipe fittings (e.g. couplings, elbows, sleeves)
7413 品目 非绝缘的铜丝绞股线、缆、编带及类似品 Copper; stranded wire, cables, plaited bands and the like, not electrically insulated
7415 品目 铜制或钢铁制带铜头的钉、平头钉、图钉、U形钉(税目83.05的货品除外)及类似品;铜制螺钉、螺栓、螺母、钩头螺钉、铆钉、销、开尾销、垫圈(包括弹簧垫 Copper, nails, tacks, drawing pins, staples (not those of heading no. 8305) and the like, of copper or iron or steel with heads of copper; screws bolts, nuts, screws hooks, rivets, cotters, washers
7418 品目 餐桌、厨房或其他家用铜制器具及其零件;铜制擦锅器、洗刷擦光用的块垫、手套及类似品;铜制卫生器具及其零件 Copper; table, kitchen or other household articles and parts thereof; pot scourers, scouring, polishing pads, gloves and the like; sanitary ware and parts thereof
7419 品目 其他铜制品 Copper; articles thereof n.e.c. in chapter 74
7401.0000 中国 8 位 铜锍,沉积铜(泥铜) —
7402.0000 中国 8 位 未精炼铜;电解精炼用的铜阳极 —
7403.1111 中国 8 位 按重量计铜含量超过99.9935%的 —
7403.1119 中国 8 位 其他 —
7403.1190 中国 8 位 阴极型材 —
7403.1200 中国 8 位 线锭 —
7403.1300 中国 8 位 坯段 —
7403.1900 中国 8 位 其他 —
7403.2100 中国 8 位 铜锌合金(黄铜) —
7403.2200 中国 8 位 铜锡合金(青铜) —
7403.2900 中国 8 位 其他铜合金(税目74.05的铜母合金除外) —
7404.0000 中国 8 位 铜废碎料 —
7405.0000 中国 8 位 铜母合金 —
7406.1010 中国 8 位 精炼铜制 —
7406.1020 中国 8 位 铜镍合金(白铜)或铜镍锌合金(德银)制 —
7406.1030 中国 8 位 铜锌合金(黄铜)制 —
7406.1040 中国 8 位 铜锡合金(青铜)制 —
7406.1090 中国 8 位 其他铜合金制 —
7406.2010 中国 8 位 精炼铜制 —
7406.2020 中国 8 位 铜镍合金(白铜)或铜镍锌合金(德银)制 —
7406.2090 中国 8 位 其他铜合金制 —
7407.1010 中国 8 位 铬锆铜制 —
7407.1090 中国 8 位 其他 —
7407.2111 中国 8 位 直线度不大于0.5毫米/米 —
7407.2119 中国 8 位 其他 —
7407.2190 中国 8 位 其他 —
7407.2900 中国 8 位 其他 —
7408.1100 中国 8 位 最大截面尺寸超过6毫米 —
7408.1900 中国 8 位 其他 —
7408.2100 中国 8 位 铜锌合金(黄铜) —
7408.2210 中国 8 位 铜镍锌铅合金(加铅德银) —
7408.2290 中国 8 位 其他 —
7408.2900 中国 8 位 其他 —
1 2 下一页 2 页